WC2500TX Whole Tree Chipper CE Certified

Features & Benefits

Compact design

The WC2500TX has a compact design to aid in maneuvering in the woods and land-clearing sites, but packs 600 hp (448 kW) of power to meet your production demands.

SmartCrush and variable-speed, dual-infeed conveyor chains

With SmartCrush technology that automatically increases down pressure when difficult material enters the cutting drum, and variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine — not pushing the material through.

Replaceable wear parts

High-wear material flow areas of the machine — such as the drum, discharge chute, cutter housing and infeed conveyor floor — are designed with replaceable bolt-in wear parts to extend machine life.

Variable chip sizes

The microchip drum produces a variety of sizes between 1/8 in (3 mm) to 5/8 in (16 mm) chips, while the macrochip drum produces chip sizes between 5/8 in (16 mm) and 1.25 in (32 mm).

Easy knife change-out

Knife setup is fast and easy. Knife position is set with two small bolts — no babbiting needed. Bite size is adjustable in 1/8 in (3 mm) increments from 1/8 in (3 mm) up to 1.25 in (32 mm) via shims. Makes knife change-out on the jobsite easy to help reduce cost of operation.

Self-adjusting hydraulic dry clutch

Self-adjusting, push-button, hydraulic dry clutch provides consistent engagement — helping to prolong clutch life, lower maintenance costs and reduce risk of damage by operator.

Specifications

Compare Models
Show Metric
  • General Dimensions and Weights

    • Maximum Length (Operation) 28.4 ft 8.7 m
    • Maximum Length - Transport 26.1 ft 8 m
    • Maximum Width (Transport) 118 in 299.7 cm
    • Maximum Height (Transport) 11.6 ft 3.5 m
    • Weight - Engine Option Two 48500 lbs 21999.2 kg
    • Sound Power 122
  • Engine - Option one

  • Engine - Option two

  • Drum/Disc Cutting System

  • Cutter Drive Components - Engine Option One

  • Standard Infeed System

  • Discharge System

  • Discharge System 2 - Top Load

  • Hydraulic System

  • Hydraulic system - track

  • Electrical System

  • Chassis

  • Other Options

  • Infeed Conveyor

Talk to a Vermeer Dealer Today

From helping you select the right equipment, to training operators, to providing the parts and service you need on a jobsite or in the field, Vermeer dealers will give you the localized support you're looking for.

* Required field
*
*
*
*
*
*
*
*
*
I have read and agree to this notice of personal information processing.*
I am 18 years or older.*
I confirm I have read and agree to the Vermeer Privacy Policy, terms and conditions.*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Kadin Cuellar, jobsite foreman | Atlas Tree Surgery

This 2500 here can get a job done in a matter of hours that would take another chipper a week.

- Kadin Cuellar, jobsite foreman | Atlas Tree Surgery

Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional accessories or components specific to their global region. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo and Equipped to Do More are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. Copyright © 2017 Vermeer Corporation. All Rights Reserved.