Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

Show Metric
  • Maximum Length - Transport
    31.1 ft 9.5 m
  • Maximum Length (Operation)
    47.1 ft 14.4 m
  • Maximum Width Transport - with Dolly
    8.4 ft 2.6 m
  • Maximum Height Transport with Dolly
    11.9 in 30.2 cm
  • Weight
    38900 lbs 17644.7 kg
  • Maximum Width
    100 in 254 cm
  • Maximum Length - Folding Conveyor
    47.1 ft 14.4 m
  • Maximum Height - Folding Conveyor
    143 ft 43.6 m
  • Weight
    38900 lbs 17644.7 kg
  • Rear Pad Weight
    25000 lbs 11339.8 kg
  • Front Pad Weight
    13900 lbs 6304.9 kg
  • Sound Power
    110.2 db(A) re1pW 110.2 db(A) re1pW
  • Manufacturer
    Weg Weg
  • Frame
    145T 145T
  • Horsepower
    2 hp 1.5 kw
  • Frequency
    60 Hz 60 Hz
  • Phase
    3 Phases 3 Phases
  • Rated Speed
    1750 rpm 1750 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    2.61 2.61
  • Locked Rotor Amps
    19.6 19.6
  • Service Factor
    1.25 1.25
  • Duty Cycle
    S1 - Continuous S1 - Continuous
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    5.9 ft-lb 8 Nm
  • Locked Rotor (%)
    240 240
  • Break Down
    300 300
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    86.5% (NEMA Premium) 86.5% (NEMA Premium)
  • Power Factor
    0.84 0.84
  • Approximate Weight
    51 lbs 23.1 kg
  • Added Items
    Terminal Block, C-Face Terminal Block, C-Face
  • Drive Belt Type
    Direct Direct
  • Manufacturer
    Weg Weg
  • Frame
    90L 90L
  • Horsepower
    2 hp 1.5 kw
  • Voltage
    380 380
  • Frequency
    50 50
  • Phase
    3 3
  • Rated Speed
    1430 rpm 1430 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    3.32 3.32
  • Locked Rotor Amps
    20.9 20.9
  • Service Factor
    1 1
  • Duty Cycle
    S1 - Continuous S1 - Continuous
  • NEMA Design
    N N
  • Insulation Class
    F F
  • Full Load Torque
    7.4 ft-lb 10 Nm
  • Locked Rotor (%)
    180 180
  • Break Down
    250 250
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    IE2 IE2
  • Power Factor
    0.83 0.83
  • Approximate Weight
    49 lbs 22.2 kg
  • Added Items
    Terminal Block, C-Face Terminal Block, C-Face
  • Drive Belt Type
    Direct Direct
  • Manufacturer
    Weg Weg
  • Frame
    326T 326T
  • Horsepower
    50 hp 37.3 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1775 rpm 1775 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    59.2 59.2
  • Locked Rotor Amps
    367 367
  • Service Factor
    1.25 1.25
  • Duty Cycle
    S1 - Continuous S1 - Continuous
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    146 ft-lb 197.9 Nm
  • Locked Rotor (%)
    230 230
  • Break Down
    270 270
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    94.5 (NEMA Premium) 94.5 (NEMA Premium)
  • Power Factor
    0.83 0.83
  • Approximate Weight
    536 lbs 243.1 kg
  • Added Items
    Terminal Block, C-Face Terminal Block, C-Face
  • Drive Belt Type
    Direct Direct
  • Manufacturer
    Weg Weg
  • Frame
    225S/M 225S/M
  • Horsepower
    50 hp 37.3 kw
  • Voltage
    380 380
  • Frequency
    50 50
  • Phase
    3 3
  • Rated Speed
    1475 rpm 1475 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    68.5 68.5
  • Locked Rotor Amps
    534 534
  • Service Factor
    1 1
  • Duty Cycle
    S1-Continuous S1-Continuous
  • NEMA Design
    N N
  • Insulation Class
    F F
  • Full Load Torque
    177 ft-lb 240 Nm
  • Locked Rotor (%)
    250 250
  • Break Down
    270 270
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    94.3 (IE3) 94.3 (IE3)
  • Power Factor
    .87 .87
  • Approximate Weight
    864 lbs 391.9 kg
  • Added Items
    Terminal Block, C-Face Terminal Block, C-Face
  • Drive Belt Type
    Direct Direct
  • Manufacturer
    Weg Weg
  • Frame
    586/7z 586/7z
  • Voltage
    460 Volt 460 Volt
  • Frequency
    60 Hz 60 Hz
  • Phase
    3 3
  • Rated Speed
    1790 rpm 1790 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    564 564
  • Locked Rotor Amps
    3610 3610
  • Service Factor
    1.15 1.15
  • Duty Cycle
    S1 - Continuous S1 - Continuous
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    1447 ft-lb 1961.9 Nm
  • Locked Rotor (%)
    210 210
  • Break Down
    200 200
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    95.8 (NEMA High) 95.8 (NEMA High)
  • Power Factor
    0.86 0.86
  • Approximate Weight
    3912 lbs 1774.5 kg
  • Added Items
    Terminal Block, Thermostat (155C), Inverter Duty, Crusher Duty, Roller Bearings Terminal Block, Thermostat (155C), Inverter Duty, Crusher Duty, Roller Bearings
  • Drive Belt Type
    Belt Belt
  • Manufacturer
    Weg Weg
  • Frame
    355 M/L 355 M/L
  • Horsepower
    500 hp 372.8 kw
  • Voltage
    380 380
  • Frequency
    50 50
  • Phase
    3 3
  • Rated Speed
    1490 rpm 1490 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    675 675
  • Locked Rotor Amps
    4730 4730
  • Service Factor
    1 1
  • Duty Cycle
    S1-Continuous S1-Continuous
  • NEMA Design
    N N
  • Insulation Class
    F F
  • Full Load Torque
    1750 ft-lb 2372.7 Nm
  • Locked Rotor (%)
    210 210
  • Break Down
    220 220
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    95.7 (IE2) 95.7 (IE2)
  • Power Factor
    .87 .87
  • Approximate Weight
    4346 lbs 1971.3 kg
  • Added Items
    Terminal Block, Thermostat (155C), Inverter Duty, Roller Bearings Terminal Block, Thermostat (155C), Inverter Duty, Roller Bearings
  • Drive Belt Type
    Belt Belt
  • Height
    90 in 228.6 cm
  • Width
    119 in 302.3 cm
  • Depth
    26 in 66 cm
  • Weight
    3020 lbs 1369.8 kg
  • Feed Table Width
    60 in 152.4 cm
  • Feed Table Depth
    21 in 53.3 cm
  • Feed Table Length - Option One
    15 ft 4.6 m
  • Feed Table Capacity
    4.8 cu yd 3.7 cu m
  • Loading Height
    6.5 ft 2 m
  • Flare Construction
    Integrated with frame Integrated with frame
  • Feed Conveyor Type
    Welded slat chain Welded slat chain
  • Material Construction
    steel steel
  • Drive Type
    Radial piston motor Radial piston motor
  • Drive Roller Construction
    Welded steel Welded steel
  • Front Idler Roller Construction
    Self-cleaning steel auger Self-cleaning steel auger
  • Infeed Floor Construction
    Welded steel with replaceable UHMW wear plates Welded steel with replaceable UHMW wear plates
  • Infeed Roller Width
    58 in 147.3 cm
  • Infeed Roller Weight
    1000 lbs 453.6 kg
  • Infeed Roller Diameter
    28 in 71.1 cm
  • Maximum Feed Height
    26 in 66 cm
  • Material Type
    Fabricated steel Fabricated steel
  • Tooth Design
    Serrated bars Serrated bars
  • Number of Teeth
    10 bars 10 bars
  • Drive Motor
    Fixed displacement, Geroler Fixed displacement, Geroler
  • Drive Planetary
    34.2:1 34.2:1
  • Feed Roller Down Pressure
    Adjustable Adjustable
  • Thrown Object Deflector
    Standard Standard
  • Deflector Position
    Variable Variable
  • Millbox Opening
    60" (152 cm) wide x 26" (66 cm) high 60" (152 cm) wide x 26" (66 cm) high
  • Drum Diameter
    22.5 in 57.2 cm
  • Tip Diameter
    31.3 in 79.6 cm
  • Drum Cutting Width
    60.6 in 153.9 cm
  • Drum Skin Thickness
    1.5 in 3.8 cm
  • Drum Speed
    1125 rpm 1125 rpm
  • Bearing Type
    Double-row, spherical roller Double-row, spherical roller
  • Bearing - Inner Race Diameter
    4.3 in 10.9 cm
  • Number of Hammers
    9 9
  • Number of Tips
    18 18
  • Center Retention Pin Dimensions
    2" (5 cm) dia. x 75.25" (191 cm) long 2" (5 cm) dia. x 75.25" (191 cm) long
  • Millbox Opening
    60" (152 cm) wide x 26" (66 cm) high 60" (152 cm) wide x 26" (66 cm) high
  • Drum Diameter
    22.5 in 57.2 cm
  • Tip Diameter
    31.3 in 79.6 cm
  • Drum Cutting Width
    60.6 in 153.9 cm
  • Drum Skin Thickness
    1.5 in 3.8 cm
  • Drum Speed
    845 rpm 845 rpm
  • Bearing Type
    Double-row, spherical roller Double-row, spherical roller
  • Bearing - Inner Race Diameter
    4.3 in 10.9 cm
  • Number of Hammers
    9 9
  • Number of Tips
    18 18
  • Center Retention Pin Dimensions
    2" (5 cm) dia. x 75.25" (191 cm) long 2" (5 cm) dia. x 75.25" (191 cm) long
  • Screen Dimensions
    3/4" (1.9 cm) thick 3/4" (1.9 cm) thick
  • Screen Type
    Fabricated out of abrasion-resistant steel Fabricated out of abrasion-resistant steel
  • Number of Screens
    2 2
  • Screen Area
    3131 sq in 20200 sq cm
  • Number of Sides
    1 1
  • Millbox Lid Liner Dimensions
    Abrasion-resistant steel Abrasion-resistant steel
  • Liner Dimensions
    1/2" (1.3 cm) thick x 5" (12.7 cm) wide x 61.6" (156.5 cm) long 1/2" (1.3 cm) thick x 5" (12.7 cm) wide x 61.6" (156.5 cm) long
  • Anvil Type
    Fabricated steel with replaceable wear surfaces Fabricated steel with replaceable wear surfaces
  • Length
    71.3 ft 21.7 m
  • Width
    48 in 121.9 cm
  • Belt Design
    3-ply - 330# with V-cleat 3-ply - 330# with V-cleat
  • Splice
    R2-stainless steel R2-stainless steel
  • Return Roller Quantity
    3 3
  • Idler Roller Diameter
    12 in 30.5 cm
  • Idler Roller Bearing
    1-15/16, 4-bolt flange 1-15/16, 4-bolt flange
  • Standard Drive Roller Diameter
    12.8 in 32.5 cm
  • Magnetic Drive Roller Diameter
    12.8 in 32.5 cm
  • Drive Motor
    Fixed displacement, Geroler Fixed displacement, Geroler
  • Belt Speed
    529 ft/min 161.2 m/min
  • Load Height
    14 ft 4.3 m
  • Tank capacity
    60 gal 227.1 L
  • Recommended Oil
    Vermeer HyPower 68 Vermeer HyPower 68
  • Filtration Method
    Dual in-tank return filters (B5=200) Dual in-tank return filters (B5=200)
  • Number of Coolers
    1 1
  • System Type
    Open-loop, pressure- and flow-compensated Open-loop, pressure- and flow-compensated
  • Pump Type
    Variable displacement, axial piston Variable displacement, axial piston
  • Pump Flow at Maximum RPM
    25.9 (60HZ) ; 24.9 (50HZ) 25.9 (60HZ) ; 24.9 (50HZ)
  • System Relief Pressure
    3000 3000
  • System Type
    Open-loop Open-loop
  • Pump Type
    Fixed displacement, gear pump Fixed displacement, gear pump
  • Pump Flow at Maximum RPM
    14.7 gpm 55.6 L/min
  • System Relief Pressure
    3000 3000
  • Motor Series
    Char-Lyn 6000 Series, Geroler Char-Lyn 6000 Series, Geroler
  • System Voltage
    380V or 460V 380V or 460V
  • System Protection
    Fused Fused
  • Display Type
    LCD LCD
  • Engine Information
    Yes Yes
  • Machine Information
    Yes Yes
  • Operational Faults
    Yes Yes
  • Gauges
    Hydraulic pressure (implement circuit) Hydraulic pressure (implement circuit)
  • Switches
    Moisture-proof, toggle style Moisture-proof, toggle style
  • Display Type
    LCD LCD
  • Engine Information
    Yes Yes
  • Machine Information
    Yes Yes
  • Operational Faults
    Yes Yes
  • Switches
    Sealed membrane Sealed membrane
  • Operating Range
    Up to 300' (91.4 m) Up to 300' (91.4 m)
  • Battery Type
    AA (qty 6) AA (qty 6)
  • Channel Setting
    50 channels 50 channels
  • Frame Description
    Unit body construction Unit body construction
  • Suspension Type
    Spring Spring
  • Manufacturer - Option One
    Hendrickson Hendrickson
  • Capacity per Axle
    20000 lbs 9071.8 kg
  • Number of Axles
    2 2
  • Tires - Option One
    425/65R22.5 super singles 425/65R22.5 super singles
  • Wheels - Option One
    Aluminum Aluminum
  • Tires - Option Two
    385/65R22.5 super singles 385/65R22.5 super singles
  • Wheels - Option Two
    Aluminum Aluminum
  • Screens
    Yes Yes
  • Special Tools Group
    Yes Yes
  • Extended Warranty
    Yes Yes
  • Preventative Maintenance
    Yes Yes
  • Special Paint
    Yes Yes
  • See Product