Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

Show Metric
  • Length - Feed Table Up, Tongue In
    177.2 in 450.1 cm
  • Length - Table Down, Tongue Extended
    198 in 502.9 cm
  • Width
    68.9 in 175 cm
  • Height
    100.8 in 256 cm
  • Weight (without winch and hydraulic jack)
    6063 lbs 2750.1 kg
  • Weight - Engine Option One
    6063 lbs 2750.1 kg
  • Sound Power
    118 dB(a) 118 dB(a)
  • Make and Model
    Cummins QSF2.8 Turbo Cummins QSF2.8 Turbo
  • Number of Cylinders
    4 4
  • Gross Horsepower (Maximum)
    72 hp 53.7 kw
  • Torque (Max)
    184.4 ft-lb 250 Nm
  • Fuel Tank Capacity
    25 gal 94.6 L
  • Fuel Type
    Diesel Diesel
  • Air Cleaner
    2-Stage Dry 2-Stage Dry
  • Oil Filter
    Spin On Spin On
  • Recommended Oil
    API CH4 API CH4
  • Oil Volume with Filter
    8.5 qt 8 L
  • Maximum Angle of Continuous Operation
    30 deg 30 deg
  • Cooling Medium
    Liquid Liquid
  • Coolant Capacity (Engine and Radiator)
    2.3 gal 8.7 L
  • Fan
    F490W-25.4-60-7 F490W-25.4-60-7
  • Clutch Type
    Clutchless PTO Clutchless PTO
  • Clutch Drive Engagement
    Belt tensioner Belt tensioner
  • Feed Roller Orientation
    Single horizontal Single horizontal
  • Number of Feed Rollers
    1 1
  • Feed Roller Clamp Load
    350 lbs 158.8 kg
  • Feed Roller Minimum Distance to Drum
    1 in 2.5 cm
  • Feed Roller Dimension
    21 in (51 cm) 21 in (51 cm)
  • Number of Knives
    2 2
  • Weight of Feed Roller
    400 lbs 181.4 kg
  • Number of Knives (2)
    4 4
  • Number of Feed Roller Motors
    1 1
  • Motor Displacement
    28.3 28.3
  • Motor Manufacturer
    White White
  • Feed Speed
    105 ft/min 105 ft/min
  • Infeed Table Width
    52 in 132.1 cm
  • Infeed Table Length
    32 in 81.3 cm
  • Infeed Hopper Height
    12 in 30.5 cm
  • Infeed Throat Capacity
    12 in x 17 in (30.5 cm x 43.2 cm) 12 in x 17 in (30.5 cm x 43.2 cm)
  • Pinch Point - Distance to End of Feed Table
    66.5 in 168.9 cm
  • Distance from Feed Table to Ground
    26 in 66 cm
  • Infeed Table Material Thickness
    .2 in .5 cm
  • Bottom Feed Stop Bar
    Standard Standard
  • Bottom Feed Stop Bar Diameter
    2 in 5.1 cm
  • Bottom Feed Stop Bar Material Thickness
    11 GA 11 GA
  • Actuation Force (BFSB)
    34 lbs 15.4 kg
  • Normal Sensitivity
    22 deg 22 deg
  • Reduced Sensitivity
    12 deg 12 deg
  • Reset Method
    Dual green hold-to-run buttons Dual green hold-to-run buttons
  • Four Position Feed Control Bar
    Standard Standard
  • Positions
    Four positions: E-stop, Forward, Stop, Reverse Four positions: E-stop, Forward, Stop, Reverse
  • Actuation Force
    34 lbs 15.4 kg
  • Green Hold to Run Button
    Standard Standard
  • Material Capacity
    12 in 30.5 cm
  • Width
    20 in 50.8 cm
  • Thickness
    .4 in 1 cm
  • Diameter
    20 in 50.8 cm
  • Speed
    2264 rpm 2264 rpm
  • Weight With Shaft
    460 lbs 208.7 kg
  • Safety Lock - Number of Positions
    2 2
  • Number of Knives
    2 2
  • Knife Thickness
    .6 in 1.5 cm
  • Material
    A8 chipper steel A8 chipper steel
  • Useable Edges
    4,43.8*8.9*2.5 4,43.8*8.9*2.5
  • Knife Size
    .625 in x 4.5 in x 9 in (1.59 cm x 11.43 cm x 22.86 cm) .625 in x 4.5 in x 9 in (1.59 cm x 11.43 cm x 22.86 cm)
  • Number of Bolts/Knife
    4 4
  • Replaceable Threaded Knife Block
    Yes Yes
  • Number of Paddles
    3 3
  • Fixture Method
    Weld On Weld On
  • Bedknife Size
    3.5 in x 17.25 in (8.89 cm x 43.82 cm) 3.5 in x 17.25 in (8.89 cm x 43.82 cm)
  • Bedknife Thickness
    1 in 2.5 cm
  • Bedknife Material
    1018 1018
  • Bedknife - Number of Useable Edges
    4 4
  • Number of Bearings
    2 2
  • Bore
    2.4 in 6.1 cm
  • Type
    Spherical rollers Spherical rollers
  • Manufacturer
    Linkbelt Linkbelt
  • Dynamic Capacity
    31400 lbs 14242.8 kg
  • Static Capacity
    53500 lbs 24267.2 kg
  • Belt Idler/Tensioner
    Yes Yes
  • Belt Type
    5 V 5 V
  • Chute Height
    96.9 in 246.1 cm
  • Chute Rotation Angle
    270 deg 270 deg
  • Rotation Type
    Chain drive manual crank with pin lock Chain drive manual crank with pin lock
  • Rotational Lock
    Yes Yes
  • Tank capacity
    7 gal 26.5 L
  • Recommended Oil Type
    VMF Vermeer VMF Vermeer
  • System Type
    Open center Open center
  • Filtration Method
    10 micron return; 100 micro suction 10 micron return; 100 micro suction
  • Pump Flow at Maximum RPM
    2.7 gpm 10.2 L/min
  • System relief pressure
    2500 psi 172.4 bar
  • Directional Control
    Yes Yes
  • Oil Cooler
    No No
  • System Voltage
    12 volt 12 volt
  • Battery
    31-950 31-950
  • Standard Gauges
    Fuel and hour gauges Fuel and hour gauges
  • Switches
    Droop and toggle switches Droop and toggle switches
  • Controller
    Vermeer ACS Vermeer ACS
  • Display
    LED LED
  • Shutdown System
    High temperature, low pressure High temperature, low pressure
  • Radio Remote Control
    No No
  • Frame Description
    Z Channel: 7 in (17.78 cm), Thickness: .25 in (.64 cm) Z Channel: 7 in (17.78 cm), Thickness: .25 in (.64 cm)
  • Tongue Description
    Z Channel: 7 in (17.78 cm), Thickness: .25 in (.64 cm) Z Channel: 7 in (17.78 cm), Thickness: .25 in (.64 cm)
  • Tongue Extension
    Standard Standard
  • Fender Description
    Steel bolt-on Steel bolt-on
  • Axle/Suspension
    Torsion axle Torsion axle
  • Type - Option One
    Rubber torsional Rubber torsional
  • Manufacturer - Option One
    China China
  • Capacity - Option One
    7716.2 lb (3500 kg) 7716.2 lb (3500 kg)
  • Tires - Option One
    215/75R16C 215/75R16C
  • Wheels - Option One
    RIM6Jx16 RIM6Jx16
  • Brake Type
    Parking brake Parking brake
  • Trailer Light Type
    LED LED
  • See Product