Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

Show Metric
  • Maximum Length - Transport
    46 ft 14 m
  • Maximum Length - Conveyor Unfolded
    72 ft 21.9 m
  • Maximum Width (Transport)
    11.9 ft 3.6 m
  • Maximum Height (Transport)
    165 in 419.1 cm
  • Weight - Engine Option One
    106000 lbs 48080.8 kg
  • King pin weight - Engine option one
    35000 lbs 15875.7 kg
  • Axle Weight
    71000 lbs 32205.1 kg
  • Sound Power
    Sound power LwA = 118.4 dB(A), at the control panel = 86.4 dB(A) Sound power LwA = 118.4 dB(A), at the control panel = 86.4 dB(A)
  • Make and Model
    CAT C32 Tier 4 Final/Stage V CAT C32 Tier 4 Final/Stage V
  • Number of Cylinders
    12 12
  • Gross Horsepower (Maximum)
    1125 hp 838.9 kw
  • Torque (Max)
    4056 ft-lb 5499.2 Nm
  • Fuel Tank Capacity
    600 gal 2271.2 L
  • Max Fuel Consumption
    55.2 gph 209 lph
  • Fuel Type
    Ultra-low sulfur diesel Ultra-low sulfur diesel
  • Air Cleaner
    Three stages - pre-cleaner, primary element and secondary element Three stages - pre-cleaner, primary element and secondary element
  • Oil Filter
    Spin-on (2) Spin-on (2)
  • Recommended Oil
    CAT DEO-ULS, API CJ-4, API CK-4 or ECF-3 10W-30/15W-40 CAT DEO-ULS, API CJ-4, API CK-4 or ECF-3 10W-30/15W-40
  • Oil Volume with Filter
    72 qt 68.1 L
  • Cooling Medium
    Liquid Liquid
  • Coolant Capacity (Engine and Radiator)
    53 gal 200.6 L
  • Air to Boil Temperature
    127 deg 127 deg
  • Alternator
    24 V 24 V
  • Fan
    60-in (152.4-cm) diameter, fixed pitch, hydraulic reverse, variable speed 60-in (152.4-cm) diameter, fixed pitch, hydraulic reverse, variable speed
  • Clutch Type
    Hydraulic-operated wet clutch Hydraulic-operated wet clutch
  • Clutch Engagement
    Switch or button Switch or button
  • Tub Table Thickness
    0.5 in (1.3 cm) 0.5 in (1.3 cm)
  • Tub Table Type
    T1 steel T1 steel
  • Table Tilt Degrees
    93 deg 93 deg
  • Millbox Opening
    32 in x 70 in (81.3 cm x 177.8 cm) 32 in x 70 in (81.3 cm x 177.8 cm)
  • Inside Diameter of Tub
    11 ft 3.4 m
  • Inside Flare Diameter - At Base of Tub
    11.4 ft 3.5 m
  • Inside Flare Diameter - At Tub Opening
    13 ft 4 m
  • Depth of Tub
    4.6 ft 1.4 m
  • Tub Capacity
    17 cu yd 13 cu m
  • Wall Thickness
    .4 in 1 cm
  • Wall Type
    Grade 50 plate Grade 50 plate
  • Loading Height
    11.3 ft 3.4 m
  • Drive Type
    Closed loop hydraulic, continuous sprocket Closed loop hydraulic, continuous sprocket
  • Drive Chain
    ANSI #160 roller chain ANSI #160 roller chain
  • Drive Tensioner
    Compression spring Compression spring
  • Drive Motor
    Hydraulic, low speed/high torque (qty 2) Hydraulic, low speed/high torque (qty 2)
  • Tub Roller Quantity
    Eight carrier, eight guide (qty 16) Eight carrier, eight guide (qty 16)
  • Tub Agitators
    4 4
  • Thrown Object Restraint System
    Pivoting tub cover assembly Pivoting tub cover assembly
  • Tub Cover Description
    Conical cover with hydraulic swing away Conical cover with hydraulic swing away
  • Tub Cover Positions
    Transport and operate with hydraulic lock Transport and operate with hydraulic lock
  • Rotor Deflector
    Standard Standard
  • Wear Liner Thickness
    .8 in 2 cm
  • Wear Liner Type
    Abrasion-resistant plate (AR400), hardfaced Abrasion-resistant plate (AR400), hardfaced
  • Falling Object Protection at Control Station
    Overhead and side protection Overhead and side protection
  • Drum Diameter
    28 in 71.1 cm
  • Tip Diameter
    36.4 in 92.5 cm
  • Drum Cutting Width
    64 in 162.6 cm
  • Drum Skin Thickness
    1.5 in 3.8 cm
  • Drum Speed
    1269 rpm 1269 rpm
  • Tip speed
    12105 ft/min 12105 ft/min
  • Bearing Type
    Double row, spherical roller Double row, spherical roller
  • Bearing - Inner Race Diameter
    5.5 in 14 cm
  • Bearing - Dynamic Capacity
    228000 lbs 103419.1 kg
  • Number of Hammers
    10 10
  • Number of Cutters
    20 20
  • Cutter Block Types
    Multiple styles, 2-bolt retention with 7/8-in (2.2-cm) UNC fasteners Multiple styles, 2-bolt retention with 7/8-in (2.2-cm) UNC fasteners
  • Center Retention Pin Dimensions
    2 in (5.1 cm) 2 in (5.1 cm)
  • Number of Wipers
    4 4
  • Screen Weight
    500-800 lb (226-362 kg) 500-800 lb (226-362 kg)
  • Screen Dimensions
    72 in x 38 in x 1.0 in (182.9 cm x 96.5 cm Ø x 2.5 cm) 72 in x 38 in x 1.0 in (182.9 cm x 96.5 cm Ø x 2.5 cm)
  • Screen Type
    AR400, reversible (qty 2) AR400, reversible (qty 2)
  • Breaker Bar Type
    T1 steel, repleaceable T1 steel, repleaceable
  • Breaker Bar Dimensions
    2.5 in x 4 in x 77 in (6.4 cm x 10.2 cm x 195.6 cm) 2.5 in x 4 in x 77 in (6.4 cm x 10.2 cm x 195.6 cm)
  • Number of Sides
    Four usable edges Four usable edges
  • Screen Area
    5100 sq in 32903.2 sq cm
  • Distance - Screen to Millbox Wall
    19 in 48.3 cm
  • Drive Shaft
    Custom Custom
  • U - Joints
    10C, greaseable 10C, greaseable
  • Length
    Discharge - 30 ft (9.1 m) Discharge - 30 ft (9.1 m)
  • Belt width
    Discharge - 48 in (121.9 cm), belly - 60 in (152.4 cm) Discharge - 48 in (121.9 cm), belly - 60 in (152.4 cm)
  • Belt Design
    Discharge - 220# V-cleat, belly - 330# smooth Discharge - 220# V-cleat, belly - 330# smooth
  • Splice
    Discharge and belly - Flexco R2 stainless steel Discharge and belly - Flexco R2 stainless steel
  • Return Roller Quantity
    5 standard and 1 vibrating roller 5 standard and 1 vibrating roller
  • Idler roller diameter
    Discharge and belly - 10 in (25.4 cm) Discharge and belly - 10 in (25.4 cm)
  • Idler Roller Bearing
    Discharge and belly - 2.93 in (4.9 cm), 4-bolt flange Discharge and belly - 2.93 in (4.9 cm), 4-bolt flange
  • Drive Roller Diameter
    14 in 35.6 cm
  • Magnetic Drive Roller Diameter
    14 in 35.6 cm
  • Drive Motor
    Geroler Geroler
  • Belt speed
    Discharge - 0-1060 fpm (0-323 m/min); belly - 0-744 fpm (0-227 m/min) Discharge - 0-1060 fpm (0-323 m/min); belly - 0-744 fpm (0-227 m/min)
  • Load Height
    13-18 ft (4-5.5 m) 13-18 ft (4-5.5 m)
  • Swing arc
    +/- 30 degrees, 60 degrees total +/- 30 degrees, 60 degrees total
  • Tank capacity
    100 gal 378.5 L
  • Recommended Oil
    Hy-power 68 Hy-power 68
  • Filtration Method
    In-tank return filters (qty 2) In-tank return filters (qty 2)
  • Number of Coolers
    1 1
  • System Type
    Open loop Open loop
  • Pump Type
    Gear pump Gear pump
  • System relief pressure
    3000 psi 206.8 bar
  • System Type
    Closed loop Closed loop
  • Pump Type
    Axial piston, variable displacement Axial piston, variable displacement
  • Pump Flow at Maximum RPM
    44.5 gpm 168.5 L/min
  • System relief pressure
    4000 psi 275.8 bar
  • Motor Series
    Geroler, heavy-duty high-torque (qty 2) Geroler, heavy-duty high-torque (qty 2)
  • System Type
    Closed loop Closed loop
  • Pump Type
    Axial piston, variable displacement Axial piston, variable displacement
  • Pump Flow at Maximum RPM
    43.4 gpm 164.3 L/min
  • System relief pressure
    5000 psi 344.7 bar
  • Motor Series
    Axial piston, variable displacement Axial piston, variable displacement
  • Fan Series - FWD/REV
    1180 rpm/500 rpm 1180 rpm/500 rpm
  • Tank capacity
    20 gal 75.7 L
  • Recommended Oil
    VMF ultra gold VMF ultra gold
  • Filtration Method
    Spin-on pressure Spin-on pressure
  • Number of Coolers
    1 1
  • System Type
    Open loop Open loop
  • Pump Type
    Gear Gear
  • Pump Flow at Maximum RPM
    10.1 gpm 38.2 L/min
  • System relief pressure
    250 psi 17.2 bar
  • System Voltage
    24 V 24 V
  • Battery
    Group 8-D, 1400 CCA (qty 2) Group 8-D, 1400 CCA (qty 2)
  • System Protection
    Fused Fused
  • Display Type
    LCD multi-function LCD multi-function
  • Engine Information
    Operational, diagnostic and system parameters Operational, diagnostic and system parameters
  • Machine Information
    Operational, diagnostic and system parameters Operational, diagnostic and system parameters
  • Operational Faults
    SAE J1939 diagnostic codes SAE J1939 diagnostic codes
  • Gauges
    Tub pressure, conveyor pressure, auxiliary hydraulic pressure, clutch pressure Tub pressure, conveyor pressure, auxiliary hydraulic pressure, clutch pressure
  • Switches
    Moisture proof, toggle style Moisture proof, toggle style
  • Display Type
    LCD multi-function LCD multi-function
  • Engine Information
    Operational, diagnostic and system parameters Operational, diagnostic and system parameters
  • Machine Information
    Operational, diagnostic and system parameters Operational, diagnostic and system parameters
  • Operational Faults
    SAE J1939 diagnostic codes SAE J1939 diagnostic codes
  • Switches
    Sealed membrane Sealed membrane
  • Operating Range
    300 ft (91.4 m) 300 ft (91.4 m)
  • Battery Type
    AA (qty 6) AA (qty 6)
  • Channel Setting
    50 channels 50 channels
  • Frame Description
    Fabricated I-beam Fabricated I-beam
  • Hitch Type
    Bolt-in kingpin - 2 in (5.1 cm) Bolt-in kingpin - 2 in (5.1 cm)
  • Fender Description
    Bolt-on, 3/16-in (0.5-cm) formed steel Bolt-on, 3/16-in (0.5-cm) formed steel
  • Brake Type
    Air actuated with spring-applied park brake Air actuated with spring-applied park brake
  • Trailer Light Type
    12V incandescent 12V incandescent
  • Axle Type
    Quad-axle leaf spring Quad-axle leaf spring
  • Tires - Option One
    255/70R22.5 duals 255/70R22.5 duals
  • Wheels - Option One
    22.5-in x 8.25-in (57.2-cm x 21.1-cm) hub-piloted steel 22.5-in x 8.25-in (57.2-cm x 21.1-cm) hub-piloted steel
  • Ground Clearance - Option One
    9 in 22.9 cm
  • Air Compressor Brand
    Mi-T-M Mi-T-M
  • Engine
    11.7 hp (8.7 kW) Honda 11.7 hp (8.7 kW) Honda
  • Maximum Pressure
    175 psi 12.1 bar
  • Maximum Air Flow
    29 cfm .8 cmm
  • Tank capacity
    30 gal 113.6 L
  • Screens
    Optional Optional
  • Special Tools Group
    Optional Optional
  • Special Paint
    Optional Optional
  • Extended Warranty
    Optional Optional
  • Preventative Maintenance
    Optional Optional
  • See Product