Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

Show Metric
  • Weight
    65000 lbs 29483.5 kg
  • Hitch Weight
    30000 lbs 13607.8 kg
  • Transport Length
    54.5 ft 16.6 m
  • Transport Width
    113 in 287 cm
  • Transport Height
    13.5 ft 4.1 m
  • Operation Length
    84.4 ft 25.7 m
  • Operation Width
    113 in 287 cm
  • Operation Height
    15.9 ft 4.8 m
  • Capacity
    Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40%    Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40%   
  • Make and Model
    John Deere PowerTech PVX 4.5L, 4045HFC93 Tier 4F John Deere PowerTech PVX 4.5L, 4045HFC93 Tier 4F
  • Number of Cylinders
    4 4
  • Engine Rating
    134 hp (93.2 kW) @ 2400 rpm, 398 ft-lb (531.6 Nm) of torque @ 1600 rpm 134 hp (93.2 kW) @ 2400 rpm, 398 ft-lb (531.6 Nm) of torque @ 1600 rpm
  • Fuel Tank Capacity
    73 gal 276.3 L
  • Fuel Consumption
    3.5 gph (13.3 L/hr) under most operating conditions 3.5 gph (13.3 L/hr) under most operating conditions
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)
    30 deg 30 deg
  • Battery
    950 cold cranking amps 950 cold cranking amps
  • Oil Filter
    Spin-on Spin-on
  • Recommended Oil
    Mobil 15/40 Mobil 15/40
  • Oil Volume with Filter
    15.5 qt 14.7 L
  • System Voltage
    12 V, 120 amp alternator 12 V, 120 amp alternator
  • Air Cleaner
    Dual element oversized Dual element oversized
  • Radiator Fan
    Suction-type Suction-type
  • Make and Model
    John Deere 4045H Tier 3 John Deere 4045H Tier 3
  • Number of Cylinders
    4 4
  • Engine Rating
    125 hp (93.2 kW) @ 2400 rpm, 355 ft-lb (481.3 Nm) of torque @ 1500 rpm 125 hp (93.2 kW) @ 2400 rpm, 355 ft-lb (481.3 Nm) of torque @ 1500 rpm
  • Fuel Tank Capacity
    100 gal 378.5 L
  • Fuel Consumption
    3.5 gph (13.3 L/hr) under most operating conditions 3.5 gph (13.3 L/hr) under most operating conditions
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)
    30 deg 30 deg
  • Battery
    950 cold cranking amps 950 cold cranking amps
  • Oil Filter
    Spin-on Spin-on
  • Oil Volume with Filter
    15.5 qt 14.7 L
  • System Voltage
    12 V, 120 amp alternator 12 V, 120 amp alternator
  • Air Cleaner
    Dual element oversized Dual element oversized
  • Radiator Fan
    Pusher type Pusher type
  • Operation
    62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa])       62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa])      
  • Tank capacity
    200 gal 757.1 L
  • Frame Description
    4 independent hydraulic jacklegs 4 independent hydraulic jacklegs
  • Axle/Suspension
    Leaf spring Leaf spring
  • Capacity
    22500 lbs 10205.8 kg
  • Tires - Option One
    235-75R 17.5H qty. 4 235-75R 17.5H qty. 4
  • Hopper Capacity
    6 cu yd 4.6 cu m
  • Hopper Bottom Width
    48 in 121.9 cm
  • Apron Conveyor Speed
    0-35 fpm (0-10.7 m/min) 0-35 fpm (0-10.7 m/min)
  • Apron Opening Height
    34 in 86.4 cm
  • Apron Opening Width
    43 in 109.2 cm
  • Hopper Height
    9.5' (2.9 m) from ground level at operating incline 9.5' (2.9 m) from ground level at operating incline
  • Hopper Opening
    13.2' x 5.3' (4 m x 1.6 m) 13.2' x 5.3' (4 m x 1.6 m)
  • Apron Conveyor Length
    16 ft 4.9 m
  • Apron Conveyor Belt Width
    48 in 121.9 cm
  • Apron Conveyor Rollers
    4" (10.2 cm) diameter qty. 14 4" (10.2 cm) diameter qty. 14
  • Drum Operation
    0-42.6 gpm (161.3 L/min) 0-42.6 gpm (161.3 L/min)
  • Drum Motor
    48.8 cu in (800 cu cm) displacement 48.8 cu in (800 cu cm) displacement
  • Drum Diameter
    6 ft 1.8 m
  • Drum Support Description
    Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width
  • Drum Length
    26 ft 7.9 m
  • Thrust Bearing Diameter
    5 in 12.7 cm
  • Thrust Bearing Face
    2.9 in 7.4 cm
  • Drum Speed
    0-24 rpm 0-24 rpm
  • Drum Drive Chain
    140 WT 140 WT
  • Drum Angle Adjustability
    0-7 degrees 0-7 degrees
  • Maximum Screen Panels
    8 8
  • Brush Diameter
    14 in 35.6 cm
  • Bristle Material
    Polyethylene Polyethylene
  • Brush Assembly Support
    Two 1.25" (3.2 cm) sealed ball bearings Two 1.25" (3.2 cm) sealed ball bearings
  • Conveyor Motor Displacement
    38.4 cu-in 629.3 cu-cm
  • Fines Belt Speed
    405 ft/min 123.4 m/min
  • Conveyor Belt Width
    36 in 91.4 cm
  • Conveyor Belt Type
    220 lb (99.8 kg), 2-ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)    220 lb (99.8 kg), 2-ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)   
  • Head/Tail Pulley Type
    Rubber-lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide    Rubber-lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide   
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block    2.5" (6.4 cm) pillow block   
  • Rubber Flashing
    Adjustable, .25" (6.44 cm) thick, 4" (10.2 cm)    Adjustable, .25" (6.44 cm) thick, 4" (10.2 cm)   
  • Idler Type
    20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers    20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers   
  • Tail Pulley Takeup
    12 in 30.5 cm
  • Self-Cleaning Return Idlers
    6, each 4" (10.2 cm) diameter    6, each 4" (10.2 cm) diameter   
  • Fines Conveyor Frame
    Part of trailer frame Part of trailer frame
  • Conveyor Motor Displacement
    38.4 cu-in 629.3 cu-cm
  • Fines Conveyor Length
    72.5 ft 22.1 m
  • Fines Belt Speed
    405 ft/min 123.4 m/min
  • Conveyor Belt Width
    36 in 91.4 cm
  • Conveyor Belt Type
    220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
  • Conveyor Belt Stacking Height
    16.6' (5.1 m) with drum at 4 degrees 16.6' (5.1 m) with drum at 4 degrees
  • Head Pulley Type
    Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block 2.5" (6.4 cm) pillow block
  • Rubber Flashing
    Adjustable, .25" (.64 cm) thick, 4" (10.16 cm) Adjustable, .25" (.64 cm) thick, 4" (10.16 cm)
  • Troughing Idler Type
    20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
  • Self-Cleaning Tail Pulley Dimensions
    10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
  • Tail Pulley Takeup
    12 in 30.5 cm
  • Self-Cleaning Return Idlers
    11, each 4" (10.2 cm) diameter 11, each 4" (10.2 cm) diameter
  • Fines Conveyor Frame
    4" x 8" (10.2 cm x 20.3 cm) structural steel tubing 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
  • Conveyor Motor Displacement
    21.4 cu-in 350.7 cu-cm
  • Fines Conveyor Length
    30.5 ft 9.3 m
  • Fines Belt Speed
    705 ft/min 214.9 m/min
  • Conveyor Belt Type
    150 lb (99.8 kg), 2 ply, 1/32" x 1/32" (.8 mm x 0.8 mm), vulcanized 150 lb (99.8 kg), 2 ply, 1/32" x 1/32" (.8 mm x 0.8 mm), vulcanized
  • Head/Tail Pulley Type
    Rubber lagged, crowned, 9.75" (24.8 cm) diameter, 32" (81.3 cm) wide    Rubber lagged, crowned, 9.75" (24.8 cm) diameter, 32" (81.3 cm) wide   
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block    2.5" (6.4 cm) pillow block   
  • Idler Type
    30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104 cm) centers    30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104 cm) centers   
  • Self-Cleaning Return Idlers
    4, each 4" (10.2 cm) diameter    4, each 4" (10.2 cm) diameter   
  • Fines Conveyor Frame
    2" x 8" (5.1 cm x 20.3 cm) structural steel building    2" x 8" (5.1 cm x 20.3 cm) structural steel building   
  • Overs Conveyor Length
    19 ft 5.8 m
  • Maximum Variable Overs Belt Speed
    290 ft/min 88.4 m/min
  • Conveyor Belt Size
    48" (121.9 cm) wide with raised crescent 48" (121.9 cm) wide with raised crescent
  • Conveyor Belt Type
    220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
  • Conveyor Belt Stacking Height
    3' (.9 m) x 10' (3.1 m) 3' (.9 m) x 10' (3.1 m)
  • Head Pulley Type
    Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block 2.5" (6.4 cm) pillow block
  • Self-Cleaning Tail Pulley Dimensions
    10" (25.4 cm) diameter, 51" (129.5 cm) wide with 2.4" (6.1 cm) shaft 10" (25.4 cm) diameter, 51" (129.5 cm) wide with 2.4" (6.1 cm) shaft
  • Tail Pulley Takeup
    12 in 30.5 cm
  • Solid Return Idler Size
    4" x 8" diameter 4" x 8" diameter
  • Overs Conveyor Frame
    4" x 8" (10.2 cm x 20.3 cm) structural steel tubing 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
  • See Product